 |
The DHCPv6 Client FQDN Option (v02) |
|
Description: This document specifies a new Dynamic Host Configuration Protocol for
IPv6, DHCPv6, option which can be used to exchange information about
a DHCPv6 client's fully-qualified domain name and about
responsibility for updating DNS RRs related to the client's address
assignments. |
|
Added on: 08-Oct-2004 | Downloads: 1592
|
|
Simple Network Time Protocol Configuration Option for DHCPv6 (v01) |
|
Description: This document describes a new DHCPv6 option for passing a list of
Simple Network Time Protocol (SNTP) server addresses to a client. |
|
Added on: 07-Dec-2003 | Downloads: 1591
|
|
IPv4 and IPv6 Dual-Stack Issues for DHCPv6 (v02) |
|
Description: A node may have support for communications using IPv4 and/or IPv6
protocols. Such a node may wish to obtain IPv4 and/or IPv6
configuration settings via the Dynamic Host Configuration Protocol
(DHCP). The original version of DHCP [1] designed for IPv4 has now
been complemented by a new DHCPv6 [4] for IPv6. This document
describes issues identified with dual IP version DHCP interactions,
the most important aspect of which is how to handle potential
problems in clients processing configuration information received
from both DHCPv4 and DHCPv6 servers. The document makes a
recommendation on the general strategy on how best to handle such
issues, and identifies future work to be undertaken. |
|
Added on: 05-May-2004 | Downloads: 1591
|
|
Lifetime Option for DHCPv6 (v03) |
|
Description: This document describes a DHCPv6 option for specifying an upper bound
for how long a client should wait before refreshing information
retrieved from DHCPv6. It is used with stateless DHCPv6 as there are
no addresses or other entities with lifetimes that can tell the
client when to contact the DHCPv6 server to refresh its
configuration. |
|
Added on: 05-May-2004 | Downloads: 1591
|
|
Renumbering Requirements for Stateless DHCPv6 (v02) |
|
Description: IPv6 hosts using Stateless Address Autoconfiguration are able to
automatically configure their IPv6 address and default router
settings. However, further settings are not available. If such
hosts wish to automatically configure their DNS, NTP or other
specific settings the stateless variant of the Dynamic Host
Configuration Protocol for IPv6 (DHCPv6) could be used. This
combination of Stateless Address Autoconfiguration and stateless
DHCPv6 could be used quite commonly in IPv6 networks. However, hosts
using such a combination currently have no means by which to be
informed of changes in stateless DHCPv6 option settings, e.g. the
addition of a new NTP server address, a change in DNS search paths,
or full site renumbering. This document is presented as a problem
statement from which a solution should be proposed in a subsequent
document. |
|
Added on: 05-May-2004 | Downloads: 1591
|
|
DHCPv6 Relay agent RADIUS Attribute Option (v00) |
|
Description: This document introduces the capabilities of the DHCPv4 Relay Agent
Information Option in RFC 3046 and the corresponding RADIUS-
Attributes Sub-option to DHCPv6. In particular, the document
describes a new DHCPv6 option called the Relay agent RADIUS
Attributes Option (RRAO) which extends the set of DHCPv6 options as
defined in RFC 3315 and 3376. Following its DHCPv4 counterpart, the
new option is inserted by the DHCPv6 relay agent when forwarding
client-originated DHCPv6 packets to a DHCPv6 server. Servers
recognizing the RRAO may use the information to implement IP address
or other parameter assignment policies. The DHCP Server echoes the
option back verbatim to the relay agent in server-to-client replies,
and the relay agent strips the option before forwarding the reply to
the client. |
|
Added on: 17-Mar-2005 | Downloads: 1591
|
|
DHCPv6 Options for Broadcast and Multicast Control Servers (v00) |
|
Description: This document defines new options for Broadcast and Multicast Service
controller discovery in an IP network. Broadcast and Multicast
service over 3G wireless networks are being developed at the time of
writing this document. Users of this service interact with a
controller in the network to derive informations that are required to
receive broadcast service. Dynamic Host Configuration Protocol can
be used to configure the controller IPv6 addresses in the user's
devices. This document defines the related options and option codes.
|
|
Added on: 17-Mar-2005 | Downloads: 1591
|
|
Service-Oriented Address Assignment using DHCPv6 (v00) |
|
Description: This document introduces a new option in DHCPv6 for Service-Oriented
Address assignment for a particular type of service that DHCPv6
Clients provide. The Service-Oriented Address can be either
Anycast/Shared Unicast or a Well-known Unicast Address. This
address assignment is much similar to other address type assignments,
except that Service-Oriented Address assignment requires the
specification of Service Type of the node that is requesting the
address. |
|
Added on: 17-Mar-2005 | Downloads: 1591
|
